How to Winterize a Manufactured Home: A Step-by-Step Checklist

Published On: October 9, 2026•10 min read•
A man inspecting the skirting and winterizing his manufactured home.

The first hard freeze has a way of showing up before you feel ready. One night the forecast dips below freezing, and you start wondering about how to winterize the pipes under your floor and whether that furnace filter has seen better days. 

A little prep now can head off most of that worry. This guide walks you through how to winterize a manufactured home, step by step, from the ground up. 

Quick Answer: What Does It Take to Winterize a Manufactured Home? 

Winterizing a manufactured home means protecting the parts of the home most exposed to cold, not just making rooms feel warmer. A solid plan covers these areas: 

  • Skirting: Secure any loose panels around the base of the home. 
  • Belly board and insulation: Check the bottom covering and underfloor insulation for gaps or moisture. 
  • Plumbing: Insulate exposed pipes and protect outdoor faucets by covering them with faucet covers and wraps.
  • Heat tape: Inspect it yearly and use it exactly as the manufacturer directs. 
  • Drafts: Seal any gaps around doors, windows and other openings. 
  • Heating system and ducts: Schedule service and look for leaking or disconnected ductwork. 
  • Roof and gutters: Look for any damage and clear debris before winter weather arrives. 

Taking these steps can’t guarantee pipes will never freeze. Together, though, they can help reduce heat loss and lower the risk of a cold-weather problem. 

Step 1: Inspect the Skirting 

Skirting is the home’s outer enclosure for the space under the floor. Before freezing weather, take a slow walk around the whole home and look for: 

  • Missing, loose or damaged panels 
  • Gaps near utility connections 
  • Other openings beneath the home 

Repair any damaged panels and secure sections that may have loosened over time. Skirting is one piece of freeze protection. It works alongside pipe insulation and a sound floor assembly to help protect your pipes from freezing wind and snow. 

Ventilation tip: Advice about closing under-home vents varies, and what is right depends on your home and its installation. Check your owner’s manual or ask a qualified professional before you block any vents.

Step 2: Check the Belly Board and Underfloor Insulation 

In most manufactured homes, the belly board holds insulation beneath the floor. Plumbing under the floor sits on the warm side of that insulation, which helps protect it from winter freezing. Over time, if the bottom covering gets damaged, that protection can slip away. Make sure to regularly check the belly board and underfloor insulation of your home. 

Look for: 

  • Torn, hanging or missing sections of bottom covering 
  • Wet, shifted or missing insulation 
  • Exposed ductwork 
  • Signs of deterioration or animal damage 
  • Plumbing or moisture problems near damaged spots 

Moisture from a crawlspace can enter the floor cavity through tears in the bottom board. Make sure to seal tears durably and reinstalling insulation that has shifted or gone missing. 

Step 3: Protect Your Plumbing 

Frozen pipes can lead to costly damage. The American Red Cross points to three common trouble spots: 

  • Pipes exposed to severe cold, such as outdoor hose bibs 
  • Water lines in unheated spaces, including crawlspaces and cabinets 
  • Pipes along exterior walls with little or no insulation 

In a manufactured home, add exposed water lines under the home, water risers and utility-entry areas to your inspection list. 

Your plumbing prep list: 

  • Insulate: Wrap vulnerable hot and cold water pipes. 
  • Inspect: Check existing pipe insulation and any freeze-protection equipment. 
  • Disconnect: Remove, drain and store outdoor hoses. 
  • Protect: Cover outdoor faucets. 
  • Drain: If your home has an interior valve for an outdoor hose bib, close it and drain the bib following your system’s instructions. 
  • Locate: Find your main water shutoff now, before you need it in a hurry. 

Step 4: Use Heat Tape Safely 

Heat tape can help, but it calls for care. Foremost Insurance advises choosing a product based on pipe length, diameter and material. Some products wrap around a pipe, and others run along its length. Not every product is approved for plastic pipe. 

Heat tape safety checklist: 

  • Pick a product approved for your pipe material and use. 
  • Check the pipe for any leaks before you install tape. 
  • Follow the manufacturer’s instructions to the letter. 
  • Never overlap the cable unless the instructions say you can. 
  • Place the thermostat where the instructions direct. 
  • Plug into a GFCI-protected receptacle. 
  • Skip the extension cord and connect directly, as Foremost advises. 
  • Install the tape directly on the pipe, never over existing pipe insulation. Cover it with insulation only if the manufacturer says to, and then use non-flammable insulation. 

Inspect your heat tape every year. The U.S. Consumer Product Safety Commission (CPSC) lists discoloration, charring, cuts, breaks in the insulation and exposed wires as signs of wear. Replace any worn equipment. 

One more caution from CPSC: Water-pipe heat tape is not meant for gutters, driveways or fuel lines.

Step 5: Seal Any Drafts Around Doors and Windows 

The U.S. Department of Energy (DOE) and ENERGY STAR both list caulking, sealing and weatherstripping as simple ways to cut energy waste. 

Where to look: 

  • Door and window weatherstripping (replace it if it has become damaged over time) 
  • Stationary gaps around windows that call for caulk 
  • Add window insulation film as an extra layer during cold months
  • Check for heat loss around window air conditioners 
  • Check openings around plumbing, electrical wiring and other penetrations 

A quick note on terms: air sealing and ventilation are different. Sealing stops unwanted leaks. Your home still needs proper ventilation, so do not seal off vents or exhaust openings that are there on purpose. 

Step 6: Service the Heating System and Inspect the Ducts 

A furnace that runs well does not always mean warm air is reaching your rooms. In a manufactured home, ducts under the floor can leak or come loose over time, and heated air then escapes into the space below. 

Heating system checklist: 

  • Regularly schedule professional service for your furnace or heating system. 
  • Clean or replace filters as directed for your equipment. 
  • Keep supply and return registers clear of furniture and clutter. 
  • Check under-home ductwork for leaks or disconnected sections. 
  • Look at crossover duct connections if your home has them. 
  • Keep furnace exhaust openings clear of snow and ice. 

For duct seams, an electric cooperative article recommends duct sealant or metal tape over ordinary duct tape. The Iredell County moisture guide favors mastic for lasting duct-joint seals. 

Keep the division of labor clear. Swapping a filter is a homeowner task. Servicing combustion equipment and making major duct repairs belong with a licensed contractor.

Step 7: Check the Roof, Gutters and Exhaust Openings 

Take a look at the condition of your roof each year before winter arrives and clear your gutters of leaves and debris. Check exterior openings too, and keep furnace exhaust outlets free of snow and ice once the weather turns. 

Step 8: Cover Winter Safety Basics 

Cold weather brings its own hazards. Walk through these before the season starts: 

  • Test smoke alarms and carbon monoxide alarms. 
  • Check exterior lighting around entries, steps and walkways. 
  • Watch for slippery steps and walkways, and clear them promptly. 

What to Do When a Hard Freeze Is Forecast 

When pipes face a real freeze threat, the Red Cross recommends changing your usual energy-saving habits for a while: 

  • Hold the thermostat steady. Keep it at the same temperature day and night. 
  • Open cabinet doors. Let warmer air reach plumbing in kitchen and bathroom cabinets. Move cleaners and chemicals out of children's reach first. 
  • Let a faucet trickle. In very cold weather, let cold water trickle from a faucet served by exposed pipes. This is a targeted step, not a reason to run every faucet all winter. 
  • Keep the heat on when you travel. Set the thermostat no lower than 55°F while you are away in cold weather. 

That 55°F figure is a general guideline. It does not promise that plumbing under your home will stay unfrozen. 

Signs of a Frozen Pipe and What to Do 

The Red Cross says a faucet that gives only a trickle can signal a frozen pipe. If you suspect one: 

  1. Keep the faucet open as you work. 
  1. Check your other faucets to see how far the problem reaches. 
  1. For a pipe you can easily reach, apply gentle heat with a hair dryer, an electric heating pad or towels soaked in hot water. 
  1. Call a licensed plumber if you cannot find the frozen section, cannot reach it or cannot thaw it. 

Never use an open flame. The Red Cross specifically warns against blowtorches, kerosene or propane heaters, charcoal stoves and other open-flame devices. Skip the crawl under the home, too. If the frozen section is hard to reach, that is the moment to call a pro. 

Your Seasonal Winterizing Checklist 

Task 

Before cold weather  Before a hard freeze 

Who handles it 

Inspect and repair skirting 

✔ 

 

You 

Check belly board and insulation 

✔ 

  You, then a pro for larger repairs 

Insulate exposed pipes 

✔ 

 

You 

Remove and store hoses, protect faucets 

✔ 

 

You 

Locate main water shutoff 

✔ 

 

You 

Inspect heat tape and follow product directions 

✔ 

 

You 

Replace weatherstripping, caulk gaps 

✔ 

 

You 

Service heating system, check ducts 

✔ 

 

Licensed professional 

Replace furnace filter 

✔ 

 

You 

Test smoke and carbon monoxide alarms 

✔ 

 

You 

Keep thermostat steady day and night 

 

✔ 

You 

Open cabinet doors under sinks 

 

✔ 

You 

Let a faucet served by exposed pipes trickle    ✔ 

You 

Ready for Winter, and Ready for What Comes Next 

A few hours of inspection and some basic supplies can make a real difference once the temperature drops. Start at the ground, work your way through the plumbing and ducts, and finish with the heating system and safety checks. 

Shopping for a new home? Cavco builds manufactured and modular homes in protected factory environments, with every home inspected throughout construction. Use our Find Your Home tool to browse homes near you, or contact a local Cavco retailer to talk through your options. 

Winterizing a Manufactured Home Frequently Asked Questions 

Does skirting alone keep pipes from freezing? 

No. Skirting helps, but industry guidance also calls for insulating exposed pipes and checking any freeze-protection equipment. Think of it as one layer in a plan. 

Should I drip my faucets in freezing weather? 

The Red Cross recommends letting cold water trickle from a faucet served by exposed pipes during very cold weather. It is a targeted step for vulnerable plumbing. 

What temperature should I set the thermostat to when I am away? 

The Red Cross recommends keeping the heat on and setting the thermostat no lower than 55°F during cold weather. 

Can I cover heat tape with insulation? 

Only if the manufacturer allows it, and then with non-flammable insulation such as fiberglass, according to CPSC. Follow the product's instructions for installation and insulation. 

How often should I inspect heat tape? 

Once a year, according to CPSC and Foremost. Replace any that shows wear. 

Why are my floors cold when the furnace works fine? 

A damaged belly covering, missing or wet floor insulation and leaky ducts can all play a part. A professional inspection can pinpoint the cause in your home. 

What if a faucet gives only a trickle? 

Suspect a frozen pipe. Keep the faucet open, follow the safe thawing steps above and call a licensed plumber if you cannot reach or thaw the frozen section. 

How much does it cost to winterize a manufactured home? 

Costs depend on your home, your climate and how much repair work you need, and we could not find a reliable national figure. Get quotes from local professionals for belly board, insulation or duct work.

About the Author: Ryan Yarbro

Ryan Yarbro
Ryan's background in journalism, educational writing, and blogging helps him create informative—and hopefully entertaining—content about manufactured and modular homes. He's genuinely curious about the factory-built housing industry and writes about everything from construction and design to financing, energy efficiency, and affordability. When he's not writing about how manufactured homes are helping solve the housing crisis, you'll find him obsessing over Park Model RV designs and plotting how he'll get his own off-grid, self-sustainable version of the amazing Skye View or Bungalow models (he still can't decide between them).